Success is founded on dedicated staff. As a result, Mikkelsen was awarded Borsens' Gazelle Award 2019.

The Danish equivalent to Financial Times - Borsen - awards every year growth companies. A gazelle company is characterized by doubling turnover or gross profit during the last 4 years, as a minimum. Also the company must show positive growth each year in the same period of time.

All the staff at Mikkelsen wish our business partners, customers and colleagues in the industry a merry Christmas and a Happy New Year.

Thank you for the trust you invested in us and for a fantastic cooperation.

Mikkelsen Denmark is open 27 and 30 December and on 2 January we are here for you again.

Mikkelsen Sweden is open 27 and 30 December and back and open for business on 2 January.

Mikkelsen Serbia is open all through Danish Xmas and will be closed 1, 2 and 7 January.

This year we have received an AAA from Bisnode for highest credit rating - again.

Only 2,7% of all Danish companies hold an AAA.

Thank you to all our loyal customers and partners for making this happen.

Come and meet us at DSEI in London 10-13 September 2019.

We are participating in the Danish promotion stand and are looking forward to seeing you.

Did you miss the RFID conference in Copenhagen? Then don't panic. You can always call Sales Manager Christoffer Bruun and ask him about our RFID solutions.

NeoTAG from Neosid can both sit in metal as well as being encapsulated in Technomelt as seen on the photo.

We are thrilled to inform you of our new colleagues in Mikkelsen. Jutland, Sweden and Denmark has been upgraded with new, enthusiastic and skilled contact persons. So just call them - they are ready for your call.

We looked for a Sales Manager who knows something - or everything - about low pressure moulding and have luckily found him.

Welcome to Johan Günther-Hanssen. Johan comes from a position in Henkel among others so we are confident he knows everything about low pressure moulding.

Come and visit us at Elmia Subcontractor 13-16 November 2018.

This year's largest event for subcontractors in the Nordic hemispfere takes place in Jonkoping, Sweden.

We are at our feet to meet and greet you at stand B08:72.

15 June 2018 Kim Moeller Jensen was appointed member of the Board at Mikkelsen.

Kim Moeller Jensen holds a position as CEO at Vitec Aloc A/S (Denmark) and Vitec Aloc AS (Norway) and has a strong background in digitilization and IT strategy.

Mikkelsen Electronics A/S has secured a large order from Swiss General Dynamics European Land Systems - MOWAG (GDELS). Danish jobs and technology transfer are part of the order.

For more information please see press release by clicking here.

Danish Minister of Defense Claus Hjort Frederiksen visits Mikkelsen Electronics.

The occasion was a very large order from General Dynamics European Land Systems - MOWAG. Mikkelsen will be manufacturing cable harnesses and dashboards for the Piranha 5 for the Danish defense.

The order means technology transfer and an expansion of the workforce to 50 production man years.

Mikkelsen has been awarded the highest credit rating from Bisnode - the AAA credit rating.

The rating only applies to 2,7% of all Danish companies.

We are rapidly growing and are hiring in both Denmark and Serbia. Please check our vacancies.

You can see them by clicking here.

• 360 degrees shielding
• Non-disrupted data transfer due to screening attenuation values from 60 dB in the 1 GHz range
• Further fields of application are sensor technology, materials handling or storage techniques
• Series 707
• 3 and 4 pole versions are intermateable
• Rating 1A and 60V
• IP67

• Can be configured on customer‘s request

The entire Mikkelsen staff wish you, your colleagues and your family a merry Xmas and a happy holidays. We are looking forward to customizing exciting and challenging new solutions in cooperation with our business partners.

In Denmark Sales, Production and Warehouse are open 27 - 29 December 2017. After New Year we are back in the office 2 January.

Mikkelsen Serbia is closed from 1 to 8 January. First working day in Mikkelsen Serbia is 8 January 2018.

Together with the E1 road appoval this sensor becomes the ideal product for mobile applications and can be even used in applications in which the vehicle drives on road.

It features:

- 0 - 0,6 up to 4000 bar pressure range

- Over pressure, vacuum or bi-directional measuremt

- Ratiometric output only

- Excellent environmental specification i.e. -40..+125°C and IP67 or higher

- Excellent measurement performance

HUBER+SUHNER Ex-proof devices can basically be used in any radio equipment and wireless infrastructure. Typical applications are process control and automation as well as access points, WiFi and cellular services. Entry devices are mainly required for coaxial cabling with Ex d enclosures, and SPD devices are employed in configurations with remotely installed antennas.
ATEX entry and surge protective devices are compliant to the ATEX Directive 2014/34/EU for use in potentially explosive atmospheres or hazardous locations and are in accordance with IEC/EN 60079 series of explosive atmosphere standards.

ATEX entry devices series 9097

• for use in Zone 1 or Zone 21
• for coaxial cabling/interconnection with Ex d enclosures

Other configuration with TNC series RF connectors or with NPT bulkhead thread on request.


ATEX surge protective devices series 9096 (GDT / QWS)

• for use in Zone 2 or Zone 22
• for lightning protection of remotely installed antennas

Other frequency band and connector configuration on request.

This year's largest subcontractor event in Norhern Europe takes place in Jonkoping from 14 to 17 November. And you are of course invited.

Anne Levinsen and Christoffer Bruun will welcome you on our stand. If you would like to book an appointment with one of them please contact us as soon as possible.

You'll find us in B08:78.

Follow the link and sign up immediately.

Under the headline "Smart Identification" this year's RFID conference takes place in Copenhagen on 14 June 2017.

The conference is a mix between exhibitions, seminars and workshops with topics such as privacy and security, work smarter and user cases.

Mikkelsen is of course participating so come and visit us.

You can read more here: http://2017.rfididk.org/

Happy New Year to all our customers and business partners.

At Mikkelsen we will do our best to deliver the best solutions to our customers with new and innovative products. So stay tuned!

IncOder are contactless inductive encoders for applications demanding high precision. The encoders have proven their use in harsh environments but the design fits a number of other applications. For example a hollow shaft with limited space for a position sensor that also requires a contact-less solution. IncOder is easily installed and is available in diameters ranging from 37mm up to 300mm.

The IncOder brand grew out of the English university world and the company has been successful with their ring shaped position sensors. Easy to install they have proven their value within extreme environments such as helicopters, submarines and other applications for the military.

With a track record in the defence industry other industries have become aware of the unusual flat ring shape and today IncOder sensors can be found in robots, TV cameras, cranes and forestry machines.

You can read more about the specifications by clicking here.

Visit us at Elmia Subcontractor in Jonkoping, Sweden.

Take the opportunity to visit Northern Europe's largest subcontractor and manufacturing fair. We are in Hall B stand 05:77 and are eager to welcome you at our stand..

Read more about Elmia Subcontractor by clicking here.

We hope to see you soon.

Come and visit us at E16 in Odense 6. - 8. September.

As always you will have the opportunity to meet us face to face and discuss how we may help you in finding the right solution for your application.

You can read more about E16 by clicking here.

You will find us in C3545.

We hope to see you soon.

Binder introduces a A12-A connector designed directly for food and pharmaceutical industry.

The connector is UL and Ecolab certified and in stainless steel (V4A). With an IP69K approval the connector is ideal for industries handling food or pharmaceuticals. The M12-A connectors come with all pole numbers and in the colour cream white/grey.

Would you like to know more? Then please contact Tage Sondergaard on tel +45 4434 0306 or tas@mi-ec.com.

Visit us at the RFID Conference in Copenhagen May 31st.

Topic of the conference is "Wireless Identification and IoT".

Mikkelsen participates with readers from KTS and NeoTags from Neosid.

NeoTags can be inserted in metal while still performing and are therefore highly suitable for harsh environments.

Please contact Christoffer Bruun for further information on wireless technology.

If you wish to read more about the conference please click here.

New microsite with a whole range of details and information regarding Test & Measurement from Huber+Suhner.

See application examples and look into product details by clicking here.

If you would like to know more you can also contact Tage Sondergaard by mail or by calling +45 4434 0309.

Due to holidays the Danish office is closed 5th and 6th May.

We will be looking forward to servicing you again on Monday 9th.

The Swedish office closes 4th May at 12:00 and opens again Monday 9th.

Happy holidays.

Binder offers M8 and M12 connectors approved for the American market.

The following connectors are UL approved:

• M8 cable mount (series 768)
• M12 panel mount (series 763, 766 and 876)
• M8 cables with moulded connectors (series 718)
• M12 cables with moulded connectors (series 763)

Binder also offers a range of other series with the American UL approval.

Do you need more information? Or would you like to hear more about other quality connectors?

Then please contact Tage Sondergaard at +45 44 34 03 00 or tas@mi-ec.com.

Radmila Antic new Purchaser in Mikkelsen Electronics A/S.

Radmila is located in Mikkelsen's subsidiary in Nis, Serbia, but is ordering on behalf of Mikkelsen Electronics A/S, Denmark.

The miniature connectors from Binder come with a snap-in locking system which makes mounting super easy.

The locking system and the moulded housing ensure an IP67 protection degree.

Features:

* Available with 3-12 contacts

* Panel mount or cable connectors

* IP67 protection degree

* Solder termination

* Moulded versions

* Diameter 16mm

* Coloured versions

The staff at Mikkelsen Electronics sends best wishes for a

Happy New Year to you, your colleages and your family.

Thank you for cooperating with us in 2015.

We are looking forward to a fantastic year 2016 with you.

Dear Customer and Cooperation Partner,

The staff at Mikkelsen Electronics wishes you a Merry Christmas and a Happy New Year.

We kindly ask you to notice our Xmas holidays where our offices will be closed.

Denmark:

24. Dec. to 3. Jan.

Sweden:

24. Dec. to 3. Jan.

Serbia:

1. Jan. to 7. Jan.

Happy holidays from the Mikkelsen Staff

Visit us at Advanced Technologies Forum in Faculty of Electronic Engineering at Nis University.

Mikkelsen Electronics Nis D.o.o. participates in Advanced Technologies Forum from 13th to 14th Oktober 2015. Come at meet us at the Faculty of Electronic Engineering.

You can read more by clicking here.

M12 for outdoor applications from Binder

* High temperature and chemical resistance provided by the use of UV resistant plastic materials, sealing materials and stainless steel metal parts.

* IP68 and IP69K due to pressure-tight cable outlet.

* Protective cap for protection against dirt and water in unmated condition.

* Lanyard can be fixed to the cable.

* C orresponding panel mount connectors with stainless steel housing and M16 x 1,5 fixing thread complete

the outdoor range.

* Mounted and non-volatile protective caps with lanyard as flat sealing tighten even when unmated.

The new CFO comes from a position as CFO in Rias A/S.

Kim Wahl Christensen has a solid financial background from a number of large and middle-sized companies.

Trained as an auditor, Kim Wahl has worked with both trading and manufacturing companies.

Bisnode has granted Mikkelsen Electronics the highest credit rating - AAA - for the fifth time in a row. Within the industry "Manufacture of other electronic and electric wires and cables" Mikkelsen Electronics is the only company with this prestigious rating.

Only 1642 Danish companies qualify for a AAA Silver rating. According to Bisnode a company with a AAA-rating is an excellent company that demonstrates a "very good capacity for meeting payment liabilities".

Were you unable to attend the RFID conference in Copenhagen. Don't worry. We have secured Neosid's contribution to the conference by Mr.Yilmaz Benzer.

Write to Ulla Haberl at uhh@mi-ec.com and get your own copy of the presentation.

At the RFID conference 21 May Yilmaz Benzer from Neosid will talk about efficency increase in tool-making and maintenance. Other speakers come from Google, Zebra Technologies, La Cave Vivante, CAEN RFID and Hilding Anders.

For more information about the conference programme click here.

For more information about the RFID technology and what it can do for your company, please contact Christoffer Bruun on cb@mi-ec.com or +45 44 34 03 04.

How can RFID actually improve the buttomline of a company? And how does the system work? This is the main topic of the annual RFID conference held in Copenhagen May 21 2015.

A number of key note speakers will focus on how the RFID technology can improve the comparative advantages of your company.

Come and visit us at our stand where the innovative solutions from Neosid will be presented. Here you can also see examples if applications where RFID is merged withTechnomelt.

Read more about the conference by clicking here.

The new HD connectors from FCT has the following features:

* Turned contacts

* High current rating

* High mechanical load

* Diverse performance classes and gold platings

* Ideal for special applications such as waterproof, non-magnetic etc.

Please feel free to contact us for more information on sales@mi-ec.com or +45 44 34 03 00.

A new price-quality standard

Affordable contactless rotary encoders? For the Contelec VertX 24 contactless measuring rotary encoder this is a reality.

The compact angle sensor based on tried-and-tested Hall measurement technology, appeals with its impressive performance features and a high level of modularity. In the standard version with a ratiometric 5V interface (10.90% Ub), the rotary encoder supports angle measurements up to 360° with 12 bit resolution and ±1% linearity in the operating temperature range from -40°C to +125°C.

The encoder is further enhanced by its compact design, metal slide bearings, a life of at least 20 million movements and IP67 protection class. The basic version can be upgraded with a range of options, including fully and half-redundant versions, custom angles from 30° to 360° and improved linearity of ±0.3%.


The key performance characteristics
- Measuring range: 0° to 360°
- Resolution: up to 12 bit
- Linearity: ±1% of the measuring range
- Max. hysteresis: 0.25°
- Max. repeatability: 0.1°
- Operating temperature: -40°C to +125°C
- Min. mechanical life: 20 million movements
- Protection class: IP54/IP67
- Possible interfaces: 10.90% Ub

For further information please do not hesitate to contact us.

With the cutting of the red ribbon the Town Mayor Prof. Dr. Zoran Perisic could declare Mikkelsen Electronics D.o.o. Nis in Serbia officially open.

A number of specially invited guests participated in the ceremony as well as local and national media.

CEO Juergen A. Haberl expressed his gratitude to those who have helped with the establishment of the company in Serbia and looked forward to expanding the production even further.

A new era begins in Mikkelsen Electronics A/S when the family steps out of the board and gives room for two new board members. Instead of Anne Levinsen and Ulla Haberl Allan J. Vestergaard and Kim Christiansen enter the board.

As CEO Allan J. Vestergaard stood behind the restructuring of NetTest A/S, a subsidiary of GN Store Nord until it was sold to Japanese Anritsu. He also has a history as CEO in sonar producing Reson A/S and a Ph.D. in organizational theory. From 2000 Allan J. Vestergaard has worked in a large number of boards in and outside Denmark.

Kim Christiansen has had various management positions in companies with emphasis on advanced technology such as CST and Reson A/S and within areas such as business development, sales, marketing and R&D. Kim Christiansen currently holds a position as Vice President in Ellipse A/S and has a Master of Science degree in Engineering.

“Our aim has been to provide the board with knowledge in fields that we as owners do not cover. Additionally, we are ambitious with Mikkelsen Electronics so we feel very lucky to be able to attract heavy profiles to our board. I’m sure it will be a huge advantage for our company”, Ulla Haberl says.

Mikkelsen Electronics A/S was founded by deceased Marius Mikkelsen. Since 2000 the ownership consists of his wife, Inga Mikkelsen, and his two daughters, Anne M. Levinsen and Ulla Haberl. The daughters each own 40% of the company which is led by Juergen A. Haberl. Apart from Allan J. Vestergaard, Kim Christiansen the new board also consists of Jens Erik Thorndahl. The latter holds a position as CEO in Athena IT-Group A/S.

More questions?

Questions can be forwarded to Ulla Haberl, Mikkelsen Electronics A/S on 44 34 03 38 or by writing to uhh@mi-ec.com.

It's time for the well-known exhibition Elektronikmessen E14 in Odense. As usual Mikkelsen participates and we would like to invite you to meet us at our stand C3339.

Elektronikmessen takes place 2-4 September at Odense Congress Center .

You can read more about the exhibition by cliking here.

Binder launches new connectors specifically for harsh environments - the HEC series 696. It is not just a connector with a high degree of protection. The locking is optimized for difficult conditions such as cold weather, soil and when wearing gloves.

For more information please contact us.

Mikkelsen has been awarded the AAA bronze rating again this year.

The rating is given to companies with the highest creditworthiness and only 1547 Danish companies have obtained the AAA bronze-diploma.

Within the field of "Manufacture of other electronic and electric wires and cables" Mikkelsen Electronics is the only one with this rating.

Jonna Karlsson is Mikkelsen's new face in Finland.

After having studied Jonna Karlsson returns to Mikkelsen as our External Sales in Finland with special emphasis on sensors, potentiometers, bolts and spacers.

We are happy to see Jonna again and are convinced that our Finnish customers will benefit from Jonna's qualifications and personality.

When it comes to position and angular measurements, today’s manufacturers often choose magnetic technologies.

Hall Effect-based sensors, for instance, yield absolute measurements which are reliable even under tough environmental conditions.

Their relatively low cost in comparison with other measurement technologies make them suitable for countless applications in machine engineering and plant design as well as for mobile applications.

In light of recent developments, this trend is expected to continue.

Please click here if you would like to know more.

The staff at Mikkelsen Electronics sends best wishes for a

Happy New Year.

Thank you for cooperating with us in 2014.

We are looking forward to a fantastic year 2015 with you.

The Binder M12 connector series now includes a data connector for transmissions up to

10 Gbit/s for industrial applications.

For more information please click here.

We are closed from 23 December 2013 to 1 January 2014.

Mikkelsen Electronics wish you a Merry Christmas and a Happy New Year.

Thank you for cooperating with us in 2013. We are looking forward to an exciting year 2014.

A new design that is making its debut at the Elmia Subcontractor Trade Show 2013 is the magnetostrictive linear position sensor of the TH1 series. This sensor represents the systematic advancement of the TMI series and further data optimization. The non-contacting sensor, which utilizes the NOVOSTRIKTIV process, is offered with measuring ranges of up to 4250 mm. It meets the protection requirements of IP67 / IP68. The permissible operating temperatures are -40° C to +185° C.

The linear position sensor is not influenced by external conditions and suitable for direct installation into pressure cylinders. Not only does the sensor comprise the monitoring and linearization of measurement values, but it also guarantees maximum data transfer safety and dynamics. The resolution is independent of the measuring range and remains consistently at 0.001 mm, which can be a deciding factor, especially where large measuring ranges are concerned.

Special emphasis was placed on the safety of the internal processing of sensor values as well as on the data output at a repetition rate of 16kHz.
The temperature coefficient of the linear position sensor is very small, which is attributable to measuring process, design, and choice of materials. The high mechanical robustness, combined with the measurement process, provides a high degree of immunity against impacts and vibrations. The rod design is easily integrated and permits the position sensing system’s use in the pressure zone of hydraulic cylinders. The touchless ring position marker provides for ease-of-installation.
The linear position sensor’s high-quality ASIC electronics provide standardized absolute output signals. In addition to analogue current and voltage
interfaces, there are also start-stop interfaces for up to 3 position markers, synchronous-serial interfaces (SSI), 24-, 25-, or 26 bit and the highly-dynamic, serial DyMoS interface with data transfer monitoring.

The advantages of conventional interfaces and bus interfaces were combined in this DyMoS interface. In addition to the positional value, it also transThemits current velocity data. The fieldbus interface is CANopen; Ethernet interfaces are being developed.
The TH1 takes measurements at high velocity and even under extreme conditions, and it does not suffer any wear and tear. It is therefore well-suited for the most diverse industrial applications, such as the precision handling of heavy components.

Henkel has decided to simplify their overall brand portfolio. This means that Macromelt® will be clustered under the brand Technomelt®.

Technomelt® is Henkel’s overall brand for hotmelt adhesives which are designed to obtain the best results in the application and production processes.

The change in name only involves the name from Macromelt® to Technomelt® and does not have any effect on the product composition or chemical formulation.

For a period of time data sheets etc. will occur with both names.

Come and meet us at our stand at Elmia Subcontractor in Jonkoping.

The fair takes place November 12-15 2013 and we will be happy to welcoming you at stand B07:35.

We are looking forward to seeing you.

Soliditet/Bisnode has granted Mikkelsen the AAA-rating for the 4th time.

The AAA-rating - or the Trippel-A - is given to "a company with an exceedingly strong abillity to meet current payment obligations". Only 1332 Danish companies have been granted the Trippel-A for more than 3 years and within the field of "Manufacture of other electronic and electric wires and cables" Mikkelsen is the only company with this rating.

You can read more about the rating system by clicking here.

TDC experienced problems with telephones in Farum.

We appoligize for the inconvenience and hope that TDC has solved the problem permanently.

Production of inexpensive tools has for a long time been a priority at Mikkelsen Electronics A/S. The company, which manages its own tool making, has now expanded its product range to include 3D printed tools. 3D printers can even print pieces with movable parts.

Please read more here.

Swiss-based Contelec launches encoders with on-site setting facilities.

Precision installation and adjustment of encoders, exact setting of the zero or middle point or the start and end points – these are some of the challenges facing system integrators, production plants and service personnel. Components are frequently installed in such confined spaces that mechanical adjustment of the rotary encoder is impossible or extremely difficult.

There is also frequently the need to reset angle sensors in the field in order to adjust for wear-related changes of the measured system. This should be easy and convenient to do and not require any complex aids.

For these purposes Contelec has introduced encoders which can be set on-site.

Read more here.

Mikkelsen Electronics has taken quality assurance of moulded applications and complete cable solutions to the next level. As one of the first Danish sub-suppliers of complete cable solutions, we now offer to x-ray all applications - also in case of series production.

Read more here.

Learn more about RFID and meet us at the RFID Conference in Copenhagen 30 May 2013.

Read more here.

The new hoods from FCT group has a special developed locking system which enables a fast assembly.

The hoods are available for 9 and 15 pole D-subs and are recommended for DATABUS-systems and industries which also require fast assembly.

Read more here.

Typical areas for these products are measurement devices and transmitters with high power (5W and 25W).

Read more here.

A whole New Productions Line with Fast Deliveries of Fiber Optics has been Launched at Mikkelsen.

Read more here.

New Connector from Binder Water and Dirt Tight even when Not Connected.

Read more here.

New Low Power Rotary Encoder from Contelec with an actual 360°measuring angle.

Read more here.

Mikkelsen Electronics receives highest credit score again this year.

See the certificate here.

Come and visit us in Jonkoping
6.-9. November 2012.

We are at stand B08:20 and it would be nice having the opportunity to seeing you.

We hope to see you
11.-13. September at E-12.

Place: Odense Congress Center

Stand: 4145

We are looking forward to meeting you.

Binder introduces twin distributors for areas with limited space.

Read more here.

Meet us at International RFID Conference May 22.

Place: IT University in Copenhagen.

Topic: "Smart Identification using RFID, EPC and NFC" 

FCT group launches new Metal-Hood FMN4H
A Low profile version for limited installation heights.

Read more here.

Tove has worked for Mikkelsen Electronics for more than 35 years and has been highly valued for her excellent skills and for her fantastic personality.

We will miss Tove as a colleague and wish her all the best in her new life.

Visit us in Stockholm at S.E.E.

We are looking forward to seeing you in C10:50.

Helena Benjamin - our Swedish sales representative - is the 5th best 9-ball pool player in Europe.

FCT introduces connectors with stainless steel shells

Read more here

Meet us at Elektronik 10 from 21.-23. September 2010 in Odense. We are looking foreward to seeing you.

Read more about the fair by clicking here.

We wish all our business partners and friends of our house a Merry Chrismas and a Happy New Year.

We close on 23 December and will be back again on 4 January 2010.

Mikkelsen sponsors Norwegian spearhead

Clara Hellan Larsen ranks top 3 in Norway

Optimel introduces new machine for small series production.

The Macromelt® Moulding machine is constructed especially for small series production with small to medium shot sizes.

Read more here

Protective Caps for M8 Panel Mount Connectors - series 718 from Binder

After 37 years with Mikkelsen Electronics as Benny Hansen has decided to retire .

Meet us at Productronica in Munich 10.-13. November 2009

Female socket with metal housing in 4, 5 and 8 poles - series 763 from Binder

Mikkelsen Electronics granted "outstanding credit score" by Experian

Helena Benjamin from our External Sales wins Swedish championship in snooker

FGP launces USB data acquisition device suitable for strain gage based sensors

Good news for customers exporting to the US and Canada! mikkelsen provides solutions with UL approval

Neosid presents mini RFID coils

Waterproof plastic hoods and connectors from FCT

M12 Female sockets with plastic housing - 763 series from Binder

Macromelt at Electronica in Munich 11.-14. November 2008

Meet us in Norway 19.-20. November 2008

Only stock of Huber + Suhner in Denmark

D-SUB filter connectors with integrated PCB assembled with chip capacitors